Chemical composition
Al: aluminum allowance
Si Si: 0.20 ~ 0.60
Copper Cu: 0.10
Magnesium Mg: 0.45 ~ 0.9
Zinc and zinc: 0.10
Manganese Mn: 0.10
Ti Ti: 0.10
Chromium Cr: 0.10
Iron Fe: 0.35
Individual: a total of 0.05:0.15
Mechanical properties of
Tensile strength of sigma b (MPa) : 130 ~ 230
6063 the ultimate tensile strength of 124 MPa
Tensile yield strength 55.2 MPa
Elongation 25.0%
Elastic coefficient 68.9 GPa
The bending ultimate Strength of 228 MPa Bearing Yield Strength 103 MPa
Poisson's ratio of 0.330
Fatigue strength of 62.1 MPa
Solid solution temperature: 520 ℃
Annealing temperature: 415 ℃ x (2-3) h at 28 ℃ / h cooling speed from 415 ℃ to 260 ℃.
Melting temperature: 615 ~ 655 ℃.
Specific heat capacity: 900
Heat treatment process:
Process fine
umber Chemical composition % impurities ≤ Cu Si Mg Fe Zn Mn Ni Sn Al ADC12 1.5-3.5 9.6-12 0.3 0.9 1.0 0.5 0.5 0.3 >86 ...
SpecificationsAluminium Alloy Ingot - ADC12 or others - High Purity - High Quality Aluminium Alloy Ingot - ADC12, ADC10, A356, A7075, A6063, A6061 - High Purity - High Quality ...
gh Purity Cobalt Powder Co Fe Ni Al Si Ca Mg 99.95% 0.0012% 0.001% 0.001% 0.005% 0.002% 0.002% ...
Chemical composition ELEMENTS VALUE ELEMENTS VALUE Copper Cu 99.97% Min. Silica Si 0.3ppm Max. Cobalt Co 0.2ppm Max. Bismuth Bi 0.1ppm Max. Lead Pb 0.2ppm Max. Tellurium Te 0.05ppm Max. Iron Fe 2ppm Max. Silver Ag 10ppm Max. Aluminum Al 0.5ppm Max. Se 0.3ppm Max. Manganese Mn 0.1ppm Max. S 4ppm Max. Nickel Ni 0.2ppm Max. MG 0.4ppm Max. Antimony ...
lead ingot Grade Pb min Ag max Cu max Bi max As max Sb max Sn max Zn max Fe max Cd max Ni max Total Pb99.994 99.994 0.0008 0.001 0.004 0.0005 0.0008 0.0005 0.0004 0.0005 – – 0.006 Pb99.990 99.990 0.0015 0.001 0.010 0.0005 0.0008 0.0005 0.0004 0. ...
